886-3-3524367service@kingconn.com.tw

Products / Board-to-Board Connectors

FPCConnectors (FFC / Flat Flexible Cable Connectors) · 5 models

→ FPC / FFC Connector Selection: Pitch, Height, Pin Count

→ PCB Connector Types: Board-to-Board, FPC / FFC, Card-Edge and Board-End I/O

An FPC connector (FFC connector, flat flexible cable connector) attaches a flat flexible cable or flex circuit to a PCB, for display modules, touch panels, camera modules and in-chassis flex links between boards. The KINGCONN FPC series has 5 models: 0.5mm-pitch front-insert back-flip (H1.0mm), flip-lock and flip-lock with latch (H:1.75mm) types, plus a 1.0mm-pitch H2.5mm type, 4 to 80 pins — each with a downloadable engineering drawing on its part page.

7FPC7-F0-06XX7FPC7-F0-06XXFPC 0.5mm n-Pin Connector, H=1.0mm, Front-Entry, Rear Flip7FPC7-F0-10XX7FPC7-F0-10XXFPC 0.5mm n-Pin Connector, H=1.00mm, Front-Entry, Flip-Up7FPC7-F0-1025XX7FPC7-F0-1025XXFPC PH1.0 H2.5mm7FPC7-F0-2201-XX7FPC7-F0-2201-XXFPC Connector, 0.5mm Pitch, Flip-Top7FPC7-F0-0517550XX7FPC7-F0-0517550XXFPC Connector, 0.5mm Pitch, H=1.75mm, Flip-Top with Latch

Parameter comparison

Values are transcribed from the source engineering drawings; blank = not stated on the drawing. Click a column to sort.

Part numberPitch (mm)Mated height (mm)Contacts
7FPC7-F0-0517550XX0.51.754, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80
7FPC7-F0-06XX0.51.04, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60
7FPC7-F0-1025XX1.02.54, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36
7FPC7-F0-10XX0.51.04, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60
7FPC7-F0-2201-XX0.54, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 64

Selection FAQ

Which part numbers are in the FPC series?
5 part numbers: 7FPC7-F0-0517550XX, 7FPC7-F0-06XX, 7FPC7-F0-1025XX, 7FPC7-F0-10XX, 7FPC7-F0-2201-XX
What contact pitches are available in FPC?
5 of the 5 part numbers in this series state this parameter on the drawing: 0.5 mm (4 part numbers); 1.0 mm (1 part number)
How many contacts can FPC be supplied with?
Contact counts span 4–80; the values offered are: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43 …
What is the mated height of FPC?
4 of the 5 part numbers in this series state this parameter on the drawing: 1.0 mm (2 part numbers); 1.75 mm (1 part number); 2.5 mm (1 part number)
What are the electrical ratings of FPC?
Operating voltage: 5 of the 5 part numbers in this series state this parameter on the drawing: 50V AC/DC (3 part numbers); 50 V Max (1 part number); 50V (1 part number)
Current rating: 5 of the 5 part numbers in this series state this parameter on the drawing: 0.5A AC/DC (3 part numbers); 0.5 Amp Max (1 part number); 0.5A (1 part number)
Withstand voltage: 4 of the 5 part numbers in this series state this parameter on the drawing: 250V AC/Minute (3 part numbers); 500V (1 part number)
Contact resistance: 4 of the 5 part numbers in this series state this parameter on the drawing: ≤20mΩ (3 part numbers); <20mΩ (1 part number)
Insulation resistance: 4 of the 5 part numbers in this series state this parameter on the drawing: ≥100MΩ (2 part numbers); >100MΩ (1 part number); 800MΩ (1 part number)
What is the operating temperature range of FPC?
5 of the 5 part numbers in this series state this parameter on the drawing: -25°C~+85°C (3 part numbers); -40°C TO +85°C (1 part number); -20℃~+85℃ (1 part number)
What materials and plating does FPC use?
Housing: 5 of the 5 part numbers in this series state this parameter on the drawing: LCP UL94-V0 (2 part numbers); LCP: UL94V-0 (1 part number); LCP, UL94V-0 (1 part number); LCP UL94-VO (1 part number)
Contacts: 4 of the 5 part numbers in this series state this parameter on the drawing: Phosphor Bronze (4 part numbers)
UL rating: 5 of the 5 part numbers in this series state this parameter on the drawing: UL94V-0 (2 part numbers); UL94-V0 (2 part numbers); UL94-VO (1 part number)
What mounting and body types does FPC offer?
4 of the 5 part numbers state a type in their description: FLIP (4 part numbers)
How do I request a drawing or samples for FPC?
Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.
Can FPC be customised?
Yes. The Taoyuan R&D team covers the full path from design and tooling to volume production, including medical-device ODM experience. Send us the application and the requirement, and sales and engineering will assess it together.
Are FPC connectors and FFC connectors the same thing?
Essentially yes: both are ZIF connectors for flat flexible cables — FPC means flexible printed circuit and FFC means flat flexible cable — and they can share a connector as long as pitch, pin count and cable thickness match. The 0.5mm and 1.0mm pitch connectors of the KINGCONN FPC series take either type of cable.
Front-insert back-flip or flip-lock for an FPC connector?
Front-insert back-flip inserts the cable first, then flips the rear actuator to lock, so the working space is behind the connector; flip-lock lifts a cover from above, drops the cable in and presses it down, so the working space is above; the type with latch adds a catch for products subject to vibration. Choose by which direction hands or fixtures can reach during assembly. All three are in the KINGCONN catalogue, stated in the part description.
Is there a drawing for each FPC connector?
Yes. Click any part card on this page to open the part page and download its engineering drawing (PDF); the dimensions, materials and plating in our spec tables are transcribed from those drawings.
Taiwan connector design & manufacturing (OEM/ODM) — memory card sockets, USB Type-C, M.2 and board-to-board connectorsSolutionsSelection guidesSite map
This site uses no tracking cookies. We keep an anonymous first-party count of clicks on contact links (type, language and country only — no personal identifiers, no ad tools). Dismissing this notice stores a single flag in your browser. Privacy Policy