Which part numbers are in the Micro SIM series?
4 part numbers: 7SIMC-AA-0006, 7SIMC-F0-0022, 7SIMC-F0-0041, 7SIMC-FA-0004
How many contacts can Micro SIM be supplied with?
Contact counts span 6–8; the values offered are: 6, 8
What is the mated height of Micro SIM?
2 of the 4 part numbers in this series state this parameter on the drawing: 1.42 mm (1 part number); 1.50 mm (1 part number)
What are the electrical ratings of Micro SIM?
Current rating: 2 of the 4 part numbers in this series state this parameter on the drawing: 0.5A AC/DC max (1 part number); 1.0A (1 part number)
Withstand voltage: 2 of the 4 part numbers in this series state this parameter on the drawing: 500V AC FOR ONE MINUTE (1 part number); 250V AC (1 part number)
Contact resistance: 2 of the 4 part numbers in this series state this parameter on the drawing: 100mΩ max (1 part number); 50mΩ MAX (1 part number)
Insulation resistance: 2 of the 4 part numbers in this series state this parameter on the drawing: 500 M OHMS Min. AT 500V DC (1 part number); 100MΩ MIN 250V DC (1 part number)
What is the operating temperature range of Micro SIM?
3 of the 4 part numbers in this series state this parameter on the drawing: -25°C~+85°C (1 part number); -40°C~+85°C (1 part number); -30℃~+80℃ (1 part number)
What materials and plating does Micro SIM use?
Housing: 3 of the 4 part numbers in this series state this parameter on the drawing: LCP UL94 V-0 (2 part numbers); HI-TEMP. PLASIC UL 94V-0 (1 part number)
Contacts: 2 of the 4 part numbers in this series state this parameter on the drawing: COPPER ALLOY (2 part numbers)
UL rating: 4 of the 4 part numbers in this series state this parameter on the drawing: UL 94V-0 (3 part numbers); UL 94-0 (1 part number)
What is the durability (mating cycles) of Micro SIM?
2 of the 4 part numbers in this series state this parameter on the drawing: 5000Min (1 part number); 3000 (1 part number)
What mounting and body types does Micro SIM offer?
2 of the 4 part numbers state a type in their description: FLIP (2 part numbers)
How do I request a drawing or samples for Micro SIM?
Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.
Can Micro SIM be customised?
Yes. The Taoyuan R&D team covers the full path from design and tooling to volume production, including medical-device ODM experience. Send us the application and the requirement, and sales and engineering will assess it together.
Push-push or hinge type for a Micro SIM socket?
It depends on whether users swap the card: an exposed slot for user-replaceable SIMs takes push-push (PUSH), ejecting on a second press; an internal slot where the card stays after assembly takes the hinge type — lift the cover, drop the card in and close it — with fewer parts and lower height. The KINGCONN Micro SIM series has both, stated in the part description.
What is the difference between 6-pin and 8-pin Micro SIM sockets?
The SIM card itself uses only 6 contacts; the extra contacts of an 8-pin model provide card detection or are reserved. Choose 8 pins when firmware must know whether a card is present (register on insertion, drop on removal). The hinge type in this series comes in 6-pin and 8PIN versions.
Is there a drawing for each Micro SIM card connector?
Yes. Click any part card on this page to open the part page and download its engineering drawing (PDF); the dimensions, materials and plating in our spec tables are transcribed from those drawings.
