886-3-3524367service@kingconn.com.tw

Products / I/O Connectors

SATAConnectors (SATA 7+15 pin Receptacles & Plugs) · 9 models

→ RJ45, HDMI, D-Sub and SATA Connector Selection Guide

A SATA connector (SATA receptacle, 7+15 pin) is the combined data-plus-power interface that lets hard drives, SSDs and optical drives plug directly into a motherboard or backplane, used in industrial PCs, NAS, server backplanes and storage modules. The KINGCONN SATA series has 9 models: 7+15P vertical SMT with ground tab, top-mount and bottom-mount side-entry SMT receptacles (H:4.20, H:3.50), a CH6.1 receptacle, a 7+12P vertical type, a 7+15P 1.0 board-clamp plug and a power cable, 1.27mm pitch — each with a downloadable engineering drawing on its part page.

7SATA-F0-00037SATA-F0-0003POWER CABLE7SATA-F0-00157SATA-F0-0015SATA 7+15-Pin Vertical SMT Connector with Grounding Tab7SATA-F0-10097SATA-F0-1009SATA 7+15PIN FEMALE CH6.17SATA-X0-00057SATA-X0-0005SATA 7+15-Pin Female Connector, 4.2mm Board-Under SMT7SATA-X0-00127SATA-X0-0012SATA 7+12P VERTICAL SMT TYPE7SATA-X0-00137SATA-X0-0013SATA 7+15-Pin Female SMT Connector, H=4.20mm, Board-Mount, Testable7SATA-X0-00167SATA-X0-0016SATA 7+15-Pin Female SMT Connector, H=4.20mm, Board-Under, Side-Entry with Fork Terminal7SATA-X0-00187SATA-X0-0018SATA 7+15-Pin Female SMT Connector, H=3.50mm, Board-Mount, Side-Entry7SATA-X0-10027SATA-X0-1002SATA 7+15-Pin Male Right-Angle Clip-On Connector, 1.0mm

Parameter comparison

Values are transcribed from the source engineering drawings; blank = not stated on the drawing. Click a column to sort.

Part numberPitch (mm)Mated height (mm)Durability
7SATA-F0-00151.27
7SATA-X0-00051.27500 CYCLES.
7SATA-X0-00121.27
7SATA-X0-00131.274.20
7SATA-X0-00161.274.20
7SATA-X0-00181.273.50
7SATA-X0-10021.27

Selection FAQ

Which part numbers are in the SATA series?
9 part numbers: 7SATA-F0-0003, 7SATA-F0-0015, 7SATA-F0-1009, 7SATA-X0-0005, 7SATA-X0-0012, 7SATA-X0-0013, 7SATA-X0-0016, 7SATA-X0-0018, 7SATA-X0-1002
What contact pitches are available in SATA?
7 of the 9 part numbers in this series state this parameter on the drawing: 1.27 mm (7 part numbers)
What is the mated height of SATA?
3 of the 9 part numbers in this series state this parameter on the drawing: 4.20 mm (2 part numbers); 3.50 mm (1 part number)
What are the electrical ratings of SATA?
Withstand voltage: 3 of the 9 part numbers in this series state this parameter on the drawing: 500 VAC (2 part numbers); 300V (1 part number)
What materials and plating does SATA use?
Housing: 7 of the 9 part numbers in this series state this parameter on the drawing: LCP UL 94V-0 (3 part numbers); LCP 30% G/F UL 94V-0 (2 part numbers); LCP, UL 94V-0, BLACK COLOR (1 part number); LCP E130i 30% G/F UL 94V-0 (1 part number)
Contacts: 5 of the 9 part numbers in this series state this parameter on the drawing: PHOSPHOR BRONZE C5191R-H,T=0.25mm (4 part numbers); BRASS C2680R EH,T=0.25mm (1 part number)
Plating: 3 of the 9 part numbers in this series state this parameter on the drawing: 1u" GOLD/TIN PLATING ON CONTACT AREA 100u"MIN. TIN PLATING ON SOLDERTAILS 50u" MIN.NICKEL UNDERPLATING OVER ALL (1 part number); GOLD/TIN PLATING ON CONTACT AREA 100u" MIN. TIN PLATING ON SOLDERTAILS 50u" MIN.NICKEL UNDERPLATING OVER ALL (1 part number); (1u" 3u" 5u" 15u" )GOLD/TIN PLATING ON CONTACT AREA 100u" MIN. TIN PLATING ON SOLDERTAILS 50u" MIN.NICKEL UNDERPLATING OVER ALL (1 part number)
UL rating: 7 of the 9 part numbers in this series state this parameter on the drawing: UL 94V-0 (7 part numbers)
What mounting and body types does SATA offer?
6 of the 9 part numbers state a type in their description: SMT (6 part numbers); VERTICAL (2 part numbers)
How do I request a drawing or samples for SATA?
Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.
Can SATA be customised?
Yes. The Taoyuan R&D team covers the full path from design and tooling to volume production, including medical-device ODM experience. Send us the application and the requirement, and sales and engineering will assess it together.
Vertical or side-entry SATA receptacle?
It follows how the drive sits: a drive plugged straight into the board (backplane, hot-swap bay, direct-mount SSD) takes the vertical type; a drive lying flat with a cable or adapter coming in from the side takes side entry, top- or bottom-mount to match the drive centre line (this series offers H:4.20 and H:3.50). The KINGCONN SATA series has both, stated in the part description.
What is the difference between SATA 7+15 pin and 7+12 pin?
7+15 pin is the standard SATA data-plus-power interface (7 signal pins, 15 power pins) common to drives and SSDs; 7+12 pin is a variant with a shortened power segment used only with devices built for it, and the two do not intermate. Both are in this series.
Is there a drawing for each SATA connector?
Yes. Click any part card on this page to open the part page and download its engineering drawing (PDF); the dimensions, materials and plating in our spec tables are transcribed from those drawings.
Taiwan connector design & manufacturing (OEM/ODM) — memory card sockets, USB Type-C, M.2 and board-to-board connectorsSolutionsSelection guidesSite map
This site uses no tracking cookies. We keep an anonymous first-party count of clicks on contact links (type, language and country only — no personal identifiers, no ad tools). Dismissing this notice stores a single flag in your browser. Privacy Policy