USB MicroConnectors (Micro USB Receptacles) · 8 models

8 part numbers: 7MCUB-F0-0016, 7MCUB-F0-0017, 7MCUB-F0-0022, 7MCUB-F0-0026, 7MCUB-F0-0030, 7MCUB-F0-0033, 7MCUB-F0-1014, 7MCUB-FA-0011

Contact counts span 5–10; the values offered are: 5, 10

Operating voltage: 4 of the 8 part numbers in this series state this parameter on the drawing: 30V AC MAX (1 part number); 30V MAX (1 part number); 30V DC (1 part number); 30V AC (1 part number)
Current rating: 6 of the 8 part numbers in this series state this parameter on the drawing: 1 A Max (2 part numbers); 1.5Amp Max (1 part number); 1.8Amps max (for Vbus & GND pins) 0.5Amps max for other pins (1 part number); 1.0A (1 part number); 1.0A/contact terminal (1 part number)
Withstand voltage: 7 of the 8 part numbers in this series state this parameter on the drawing: 100 V(ac) for 1 min (2 part numbers); 500V AC for 1 minute (1 part number); 100 VAC/min (1 part number); 100V AC (1 part number); 300 V AC AT Sea Levol (1 part number); 100V(r.m.s)AC FOR 1 MINUTE (1 part number)
Contact resistance: 7 of the 8 part numbers in this series state this parameter on the drawing: <30 Milliohms (1 part number); 30mΩ MAX (1 part number); 30 mΩ MAX INITIAL; 40 mΩ MAX AFTER 10000 CYCLES (1 part number); 30milliohms MAX (1 part number); 50 milliohms MAX (1 part number); 50 mΩ Max (1 part number); 30m MAX (1 part number)
Insulation resistance: 5 of the 8 part numbers in this series state this parameter on the drawing: 100 MΩ MIN (2 part numbers); 100MEGA ohms MIN (2 part numbers); >1000 Megaohms (1 part number)

5 of the 8 part numbers in this series state this parameter on the drawing: -30°C ~ +80°C (3 part numbers); -55°C - +85°C (1 part number); -30°C ~ 85°C (1 part number)

Housing: 5 of the 8 part numbers in this series state this parameter on the drawing: LCP UL94V-0 (1 part number); Hing Temperature Thermoplastics, UL 94V-0LCP (1 part number); High temperature thermoplastic with g.f, UL94v-0 (1 part number); BLACK PA9T High temperature thermoplastic with g.f,UL94 v-0 (1 part number); HI-TEMP.PLASTIC UL 94V-0 BLACK (1 part number)
Contacts: 5 of the 8 part numbers in this series state this parameter on the drawing: Copper Alloy (2 part numbers); C2680 (1 part number); copper alloy, t=0.20mm (1 part number); COPPER ALLOY,T=0.15mm (1 part number)
Shell: 6 of the 8 part numbers in this series state this parameter on the drawing: Copper Alloy (2 part numbers); SUS304 (1 part number); copper (1 part number); copper alloy, t=0.25mm (1 part number); STAINLESS STEEL T=0.3mm (1 part number)
UL rating: 7 of the 8 part numbers in this series state this parameter on the drawing: UL 94V-0 (7 part numbers)

3 of the 8 part numbers in this series state this parameter on the drawing: 10,000 (1 part number); 5000 CYCLES MIN (1 part number); 3000 (1 part number)

4 of the 8 part numbers state a type in their description: SMT (3 part numbers); REVERSE (1 part number); VERTICAL (1 part number); DIP (1 part number)

Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.

Yes. The Taoyuan R&D team covers the full path from design and tooling to volume production, including medical-device ODM experience. Send us the application and the requirement, and sales and engineering will assess it together.

Micro USB is an exposed port the user plugs every day, so pull strength matters most: prefer a model with DIP or four-leg board-lock legs that carry the pull force into the board. Pure SMT two-leg types are thinner and suit boards with limited thickness or internal links. The KINGCONN USB Micro series has both, stated in the part description.

No. The Micro USB 3.0 receptacle has 10 pins and a wider port than the 5-pin Micro-B, so the enclosure cut-out differs. A Micro USB 3.0 receptacle does accept a 5-pin Micro-B plug at USB 2.0 speed. Both are in this series; the pin count is in the part description.

Yes. Click any part card on this page to open the part page and download its engineering drawing (PDF); the dimensions, materials and plating in our spec tables are transcribed from those drawings.