Which part numbers are in the M.2 series?
5 part numbers: 7NGFF-F0-0020-X, 7NGFF-F0-0302, 7NGFF-F0-0305, 7NGFF-F0-0402, 7NGFF-F0-0428
What contact pitches are available in M.2?
5 of the 5 part numbers in this series state this parameter on the drawing: 0.50 mm (5 part numbers)
How many contacts can M.2 be supplied with?
Contact counts span 67–67; the values offered are: 67
What is the mated height of M.2?
4 of the 5 part numbers in this series state this parameter on the drawing: 3.2 mm (2 part numbers); 4.0 mm (1 part number); 4.2 mm (1 part number)
What are the electrical ratings of M.2?
Operating voltage: 2 of the 5 part numbers in this series state this parameter on the drawing: 50V AC rms (1 part number); 50V AC (1 part number)
Current rating: 2 of the 5 part numbers in this series state this parameter on the drawing: 0.5AMP Max (1 part number); 0.5 A MAX. / PIN (1 part number)
Contact resistance: 2 of the 5 part numbers in this series state this parameter on the drawing: Initial 55mΩ MAX, After test increase 20mΩ MAX (1 part number); 55 mΩ/PIN (1 part number)
What materials and plating does M.2 use?
Housing: 2 of the 5 part numbers in this series state this parameter on the drawing: MG350,BLACK,UL94V-0 (1 part number); LCP (1 part number)
Contacts: 3 of the 5 part numbers in this series state this parameter on the drawing: PHOSPHOR BRONZE (2 part numbers); COPPER ALLOY (1 part number)
UL rating: 5 of the 5 part numbers in this series state this parameter on the drawing: UL94V-0 (5 part numbers)
How do I request a drawing or samples for M.2?
Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.
Can M.2 be customised?
Yes. The Taoyuan R&D team covers the full path from design and tooling to volume production, including medical-device ODM experience. Send us the application and the requirement, and sales and engineering will assess it together.
Which M.2 key do I need: B key or M key?
It follows the module: NVMe SSDs use M key; SATA SSDs and WWAN modules use B key; a module notched B+M fits either socket. The KINGCONN M.2 series has both M-key and B-key sockets; notch positions and pin ranges are in the
M.2 key types and sizes guide.
How do I choose the stack height of an M.2 connector?
Stack height is the gap between the motherboard and the underside of the mated module, and it has to clear the components under the module — double-sided SSDs need more room than single-sided wireless cards. The heights of the KINGCONN M.2 series are on each part card and drawing; email the part number to service@kingconn.com.tw for the drawing and samples.
Is an M.2 connector the same as a Mini PCIe connector?
