SwitchSwitches (Tact, DIP, Slide and Rocker Switches) · 19 models

19 part numbers: 7WHTE-F0-0052, 7WHTE-F0-0055, 7WHTE-F0-0063, 7WHTE-F0-0064, 7WHTE-F0-0066, 7WHTE-F0-0096, 7WHTE-F0-00XX, 7WHTE-F0-0228, 7WHTE-F0-0X70-4.3, 7WHTE-F0-3038, 7WHTE-F0-3054XXXX, 7WHTE-F0-3066-4.3, 7WHTE-F0-3079, 7WHTE-F0-3081-X, 7WHTE-F0-3175-2.0, 7WHTE-F0-3X36, 7WHTE-F0-GL67-05-L, 7WHTE-F0-S028, 7WHTE-F0-XX61

4 of the 19 part numbers in this series state this parameter on the drawing: 1.27 mm (2 part numbers); 3 mm (1 part number); 2.54 mm (1 part number)

Contact counts span 2–10; the values offered are: 2, 4, 5, 6, 8, 10

Operating voltage: 10 of the 19 part numbers in this series state this parameter on the drawing: DC12V (5 part numbers); DC5V (1 part number); 4V DC (1 part number); 125VAC (1 part number); 12VCD (1 part number); 12 VDC (1 part number)
Current rating: 15 of the 19 part numbers in this series state this parameter on the drawing: 50mA (10 part numbers); 0.3A (2 part numbers); 50mA MAX (1 part number); 16A (1 part number); 25mA (1 part number)
Withstand voltage: 13 of the 19 part numbers in this series state this parameter on the drawing: AC250V 50Hz/1min (9 part numbers); AC250V 50Hz 1Min (1 part number); AC 1500V 1 Minute (1 part number); AC 250V (50/60Hz for 1 minute) (1 part number); 500VAC/1 minute (1 part number)
Contact resistance: 13 of the 19 part numbers in this series state this parameter on the drawing: ≤100mΩ Max (6 part numbers); ≤50mΩ (2 part numbers); ≤70mΩ (1 part number); 30m OHMS Max (1 part number); ≤100mΩ (1 part number); 100m Ω max. (Initial) (1 part number); 100mΩ MAX (1 part number)
Insulation resistance: 14 of the 19 part numbers in this series state this parameter on the drawing: ≥100MΩ 100V DC/1min (6 part numbers); ≥100MΩ (3 part numbers); 100MΩ 100V DC (1 part number); >100MΩ (1 part number); DC500V 100M OHMS Min (1 part number); 100M Ω min.(at 250 VDC) (1 part number); 100MΩ MIN (1 part number)

13 of the 19 part numbers in this series state this parameter on the drawing: -40℃ ~ +85℃ (5 part numbers); -25°C~70°C (2 part numbers); -30°C ~ +85°C (2 part numbers); -25~+125° C (1 part number); -40℃ ~ +105℃ (1 part number); -20°C to 70°C (1 part number); -40° C~+125° C (1 part number)

Housing: 9 of the 19 part numbers in this series state this parameter on the drawing: LCP (4 part numbers); PPA (1 part number); High temperature resistant plastic (1 part number); Nylon #66 UL 94V-2 (1 part number); HIGH TEMPERATURE RESISTANT PLASTIC, UL94 -0 (1 part number); UL94 V0 (1 part number)
Contacts: 4 of the 19 part numbers in this series state this parameter on the drawing: Brass (2 part numbers); COPPER ALLOY (1 part number); AgSnO₂In₂O₃(10)/Cu (1 part number)
Plating: 4 of the 19 part numbers in this series state this parameter on the drawing: AG PLATED (2 part numbers); Ag-Plate (1 part number); Gold (1 part number)
UL rating: 5 of the 19 part numbers in this series state this parameter on the drawing: UL-94HB (1 part number); UL 94V-2 (1 part number); UL94V-0 (1 part number); UL94 -0 (1 part number); UL94 V0 (1 part number)

15 of the 19 part numbers in this series state this parameter on the drawing: 100,000 (5 part numbers); 50, 000 cycles Min (2 part numbers); 10,000 (2 part numbers); 200,000 cycles Min (1 part number); 30, 000 cycles Min (1 part number); 1,000,000 (1 part number); 2000 (1 part number); 3000cycles minimum (1 part number); 300,000 (1 part number)

7 of the 19 part numbers state a type in their description: SMT (3 part numbers); DIP (3 part numbers); SLIDE (1 part number); VERTICAL (1 part number)

Email service@kingconn.com.tw with the part number. Clicking any part card on a product page also pre-fills the enquiry subject with that part number. Our sales team will reply with the drawing, samples and pricing.

Yes. The Taoyuan R&D team covers the full path from design and tooling to volume production, including medical-device ODM experience. Send us the application and the requirement, and sales and engineering will assess it together.

It depends on who operates it and how often: a button the user presses every day takes a tact switch (TACT), which springs back and has a long life; an option set at the factory or during service takes a DIP switch (DIP SWITCH), which stays where it is set; one switch selecting several positions takes a rotary switch. The KINGCONN Switch series lists all of these, stated in the part description.

The height sets how far the button top sits above the board and whether it reaches through the panel opening: measure from the board surface to the outside of the panel, then choose a model slightly taller (this series includes heights such as 4.3). Heights and sizes (such as 6.2X6.2) are on each part description and drawing.

Yes. Click any part card on this page to open the part page and download its engineering drawing (PDF); the dimensions, materials and plating in our spec tables are transcribed from those drawings.