Reverse-Type ConnectorsREVERSE-TYPE CONNECTORS · 7 SERIES · 11 MODELS

What is a reverse-type connector?

A reverse-type connector presents the card or plug contact face in the opposite direction to the normal (standard) type: it is used when the connector must sit on the other side of the PCB, or the card must insert label-side down to suit the enclosure. The footprint and pin order are mirrored, so a normal-type and a reverse-type part are not interchangeable on the same layout.

Connector glossary →

When to choose reverse-type connectors

• Choose reverse type when the enclosure opening is on the far side of the board, or the stack requires the card to enter contacts-up.
• When reusing an existing board, check pin order and footprint on the drawing first: a reverse-type part is not a substitute for the normal type.
• Parts on this page are collected by the word REVERSE in the catalogue description; the mounting orientation is defined by the drawing on each part page.

Browse by series

CF · 2 part numbers

7CFHD-F9-4155CF connector reverse type post 40.16mm L=19mm H5.4 G/F

7CFHD-F9-9101CF CARD Reverse CONNECTOR

DIMM(DDR) · 1 part number

7DDR2-F0-0006DDR H:5.2 TYPE Reverse For 200 IN BLACK

MS · 2 part numbers

7MSMS-X9-011410 IN 1 CONNECTOR(REVERSE)

7MSMS-XX-X111Memory Stick & Memory Stick Duo CONNECTOR REVERSE TYPE

Micro SD ( T-Flash ) · 1 part number

7MSDP-AA-1110Micro SD Memory Card Socket Reverse Type

SD · 2 part numbers

7SDCN-F0-0026SD CONN REVERSE TYPE PUSH PUSH

10,000 cycles

7SDCN-F0-0033SD CONN REVERSE H:2.95mm

H 2.95 mm

SD 4.0 · 2 part numbers

7SD40-FA-0003SD4.0 Reverse non push Type H2.90mm

H 2.9 mm · 19 contacts

7SD40-FA-0008SD4.0 PUSH H:3.10 REVERSE

H 3.1 mm

USB Micro · 1 part number

7MCUB-F0-0016Micro USB 5-Pin Female Type-B Reverse 2-Pin SMT Connector (Postless)

Other types: push-push card sockets; non-eject card sockets; card sockets with positioning post

Request a quote or samples

Selection FAQ